GoTo Connect 集成—

功能

SIP trunk integration for additional numbers
Hosted PBX with visual dial plan editor
Works alongside GoTo Connect native numbers
Registration-based trunk authentication
Global number coverage

如何接入

Create a Cliqtel SIP trunk

Click Connect to create a trunk for GoTo Connect.

Configure SIP trunk in GoTo

In GoTo Connect admin, add an external SIP trunk pointing to sip.cliqtel.com with your credentials.

Set up dial plan

Use the visual dial plan editor to route your Cliqtel numbers to extensions, ring groups, or voicemail.

Test

Verify inbound and outbound call routing.

前置要求

GoTo Connect account
Admin access to GoTo Connect portal
SIP trunk feature available on your plan
At least one Cliqtel number

中继配置

连接时将创建一个采用以下优化默认值的 SIP 中继：

transport

udp

codec preference

g722,ulaw,alaw

nat mode

auto

auth type

credentials

max channels

8

接入后核对清单

SIP trunk shows connected in GoTo admin
Inbound call reaches GoTo Connect user
Outbound call routes via Cliqtel

GoTo Connect + Cliqtel：应用场景

Add PSTN calling to GoTo Connect

Enable outbound and inbound calls from your GoTo Connect tenant using Cliqtel SIP trunks. Works with direct routing and BYOC models.

International expansion

Give your GoTo Connect users local numbers in every country you operate in. Customers see a familiar area code, your team works from anywhere.

Cost reduction

Replace bundled minutes in your GoTo Connect plan with Cliqtel's pay-per-use outbound rates. Most customers see 30-60% savings on international calls.

GoTo Connect 集成——常见问题

How do I connect Cliqtel to GoTo Connect?

Create a SIP trunk in your Cliqtel portal, copy the credentials, and paste them into GoTo Connect's SIP provider settings. A full step-by-step guide is in the setup steps above.

Does Cliqtel work with my version of GoTo Connect?

Cliqtel supports all current and recent versions of GoTo Connect. Check the supported versions list above or contact support if you're running an older release.

How much does it cost to use Cliqtel with GoTo Connect?

Cliqtel has no setup fees, no monthly platform fees, and no channel limits. You pay only for the DID numbers you rent (from EUR 1.49/mo) and the minutes you use. See our pricing page for details.

Can I use my existing phone numbers?

Yes. Cliqtel supports porting for most countries. Contact support with your existing numbers and we'll check portability and timelines (typically 5-10 business days).

Does GoTo Connect need any special firewall configuration?

Open UDP 5060 (SIP) and UDP 10000-20000 (RTP) outbound to sip.cliqtel.com. Most PBX systems handle this automatically if you're not behind a strict NAT.

GoTo Connect

功能