Mitel MiVoice

PBX 提供元: Mitel Networks 汎用

Mitel MiVoice Business is an enterprise communications platform supporting SIP trunk integration. Connect Cliqtel as your PSTN provider through SIP trunk configuration in the MiVoice administration interface.

対応: 9.x。
今すぐ接続 アクセス Mitel Networks →

機能

接続方法

1
Configure SIP trunk
In MiVoice Business administration, create a new SIP trunk pointing to sip.cliqtel.com with your Cliqtel credentials.
2
Set up ARS routing
Configure Automatic Route Selection to use the Cliqtel trunk for outbound calls.
3
Create DID assignments
Map your Cliqtel numbers to MiVoice users, hunt groups, or auto attendants.
4
Test connectivity
Verify trunk registration and test inbound/outbound calls.

要件

トランク設定

接続時に、これらの最適化されたデフォルトで SIP トランクが作成されます:

transport
udp
codec preference
g722,ulaw,alaw
nat mode
auto
auth type
credentials
max channels
8

セットアップ後チェックリスト

  • SIP trunk shows active in MiVoice status
  • Inbound call routes to correct user or group
  • Outbound call completes via Cliqtel trunk

Mitel MiVoice + Cliqtel: ユースケース

Replace your current SIP provider

Migrate your Mitel MiVoice system from an expensive SIP provider to Cliqtel without changing your PBX configuration — same SIP protocol, transparent per-number pricing.

Add international numbers to Mitel MiVoice

Expand your Mitel MiVoice deployment with local, toll-free, and mobile numbers in 70+ countries. Assign them to extensions or queues exactly as you do today.

Failover and redundancy

Add Cliqtel as a secondary SIP trunk for Mitel MiVoice to fail over when your primary carrier has an outage. Keep your customers reachable 24/7.

Frequently asked

Mitel MiVoice 連携 — FAQ

How do I connect Cliqtel to Mitel MiVoice?
Create a SIP trunk in your Cliqtel portal, copy the credentials, and paste them into Mitel MiVoice's SIP provider settings. A full step-by-step guide is in the setup steps above.
Does Cliqtel work with my version of Mitel MiVoice?
Cliqtel supports all current and recent versions of Mitel MiVoice. Check the supported versions list above or contact support if you're running an older release.
How much does it cost to use Cliqtel with Mitel MiVoice?
Cliqtel has no setup fees, no monthly platform fees, and no channel limits. You pay only for the DID numbers you rent (from EUR 1.49/mo) and the minutes you use. See our pricing page for details.
Can I use my existing phone numbers?
Yes. Cliqtel supports porting for most countries. Contact support with your existing numbers and we'll check portability and timelines (typically 5-10 business days).
Does Mitel MiVoice need any special firewall configuration?
Open UDP 5060 (SIP) and UDP 10000-20000 (RTP) outbound to sip.cliqtel.com. Most PBX systems handle this automatically if you're not behind a strict NAT.

他の PBX 連携

3CX
3CX
Connect Cliqtel numbers to your 3CX phone system with GUI-led registration setup.
 FreePBX
FreePBX
Add Cliqtel SIP trunks to FreePBX with PJSIP registration and full route control.
 Asterisk
Asterisk
Connect Asterisk directly to Cliqtel with PJSIP config files — full control, no GUI required.
 Yeastar
Yeastar
Set up Cliqtel as an ITSP provider on Yeastar P-Series and S-Series systems.
 Cisco CUCM
Cisco CUCM
Connect Cliqtel to Cisco Unified Communications Manager via SIP trunk or SBC.
 Avaya IP Office
Avaya IP Office
Add Cliqtel SIP trunks to Avaya IP Office for inbound and outbound PSTN calling.

Mitel MiVoice に接続する準備はできましたか？

事前構成された SIP トランクを数秒で作成できます。認証情報は即座に生成されます。

今すぐ接続 すべての連携をブラウズ