Cisco CUCM

PBX 提供元: Cisco Systems 汎用

Cisco CUCM is the enterprise unified communications platform used in large organizations and government. Connect Cliqtel as a SIP trunk provider through direct SIP trunk configuration or via a CUBE (Cisco Unified Border Element) session border controller.

対応: 12.x, 14.x, 15.x。
今すぐ接続 アクセス Cisco Systems →

機能

接続方法

1
Create a SIP trunk in CUCM
In CUCM Administration, navigate to Device > Trunk. Create a new SIP Trunk pointing to sip.cliqtel.com.
2
Configure SIP trunk security profile
Set up a SIP Trunk Security Profile with the appropriate transport (UDP/TLS) and authentication settings.
3
Create route patterns
Add route patterns to direct inbound calls from Cliqtel DIDs to the correct directory numbers and partitions.
4
Test and validate
Use CUCM RTMT to verify trunk registration. Make test calls for inbound and outbound routing.

要件

トランク設定

接続時に、これらの最適化されたデフォルトで SIP トランクが作成されます:

transport
udp
codec preference
g722,ulaw,alaw
nat mode
off
auth type
credentials
max channels
10

セットアップ後チェックリスト

  • SIP trunk shows active in CUCM RTMT
  • Inbound call reaches the correct directory number
  • Outbound call routes through Cliqtel trunk
  • No certificate errors (if using TLS)

Cisco CUCM + Cliqtel: ユースケース

Replace your current SIP provider

Migrate your Cisco CUCM system from an expensive SIP provider to Cliqtel without changing your PBX configuration — same SIP protocol, transparent per-number pricing.

Add international numbers to Cisco CUCM

Expand your Cisco CUCM deployment with local, toll-free, and mobile numbers in 70+ countries. Assign them to extensions or queues exactly as you do today.

Failover and redundancy

Add Cliqtel as a secondary SIP trunk for Cisco CUCM to fail over when your primary carrier has an outage. Keep your customers reachable 24/7.

Frequently asked

Cisco CUCM 連携 — FAQ

How do I connect Cliqtel to Cisco CUCM?
Create a SIP trunk in your Cliqtel portal, copy the credentials, and paste them into Cisco CUCM's SIP provider settings. A full step-by-step guide is in the setup steps above.
Does Cliqtel work with my version of Cisco CUCM?
Cliqtel supports all current and recent versions of Cisco CUCM. Check the supported versions list above or contact support if you're running an older release.
How much does it cost to use Cliqtel with Cisco CUCM?
Cliqtel has no setup fees, no monthly platform fees, and no channel limits. You pay only for the DID numbers you rent (from EUR 1.49/mo) and the minutes you use. See our pricing page for details.
Can I use my existing phone numbers?
Yes. Cliqtel supports porting for most countries. Contact support with your existing numbers and we'll check portability and timelines (typically 5-10 business days).
Does Cisco CUCM need any special firewall configuration?
Open UDP 5060 (SIP) and UDP 10000-20000 (RTP) outbound to sip.cliqtel.com. Most PBX systems handle this automatically if you're not behind a strict NAT.

他の PBX 連携

3CX
3CX
Connect Cliqtel numbers to your 3CX phone system with GUI-led registration setup.
 FreePBX
FreePBX
Add Cliqtel SIP trunks to FreePBX with PJSIP registration and full route control.
 Asterisk
Asterisk
Connect Asterisk directly to Cliqtel with PJSIP config files — full control, no GUI required.
 Yeastar
Yeastar
Set up Cliqtel as an ITSP provider on Yeastar P-Series and S-Series systems.
 Avaya IP Office
Avaya IP Office
Add Cliqtel SIP trunks to Avaya IP Office for inbound and outbound PSTN calling.
 Mitel MiVoice
Mitel MiVoice
Connect Cliqtel to Mitel MiVoice Business for SIP trunk-based PSTN connectivity.

Cisco CUCM に接続する準備はできましたか？

事前構成された SIP トランクを数秒で作成できます。認証情報は即座に生成されます。

今すぐ接続 すべての連携をブラウズ