FreePBX इंटीग्रेशन

फीचर्स

PJSIP trunk with outbound registration
Per-DID inbound route matching
Outbound route precedence control
Codec and transport configuration via UI
Works with FreePBX 15 and later

कैसे कनेक्ट करें

Create a PJSIP trunk

Navigate to Connectivity > Trunks and create a new PJSIP trunk named cliqtel-pjsip.

Configure SIP settings

Set SIP Server to sip.cliqtel.com, enter your username and password, set Authentication to Outbound and Registration to Send.

Create inbound routes

Add inbound routes matching your Cliqtel numbers to ring groups, extensions, or IVR.

Apply config and test

Click Apply Config in FreePBX. Check trunk status — it should show Registered. Make a test call.

आवश्यकताएँ

FreePBX 15 or later with PJSIP
Admin access to FreePBX web UI
Network reachability to sip.cliqtel.com
At least one Cliqtel number

Trunk कॉन्फ़िगरेशन

जब आप कनेक्ट करते हैं, तो इन ऑप्टिमाइज़्ड डिफ़ॉल्ट के साथ एक SIP trunk बनाया जाता है:

transport

udp

codec preference

ulaw,alaw,g722

nat mode

auto

auth type

credentials

max channels

4

पोस्ट-सेटअप चेकलिस्ट

Trunk shows Registered in FreePBX status page
Inbound test call routes to the correct extension
Outbound calls work with correct caller ID
Apply Config completes without errors

FreePBX + Cliqtel: उपयोग के मामले

Replace your current SIP provider

Migrate your FreePBX system from an expensive SIP provider to Cliqtel without changing your PBX configuration — same SIP protocol, transparent per-number pricing.

Add international numbers to FreePBX

Expand your FreePBX deployment with local, toll-free, and mobile numbers in 70+ countries. Assign them to extensions or queues exactly as you do today.

Failover and redundancy

Add Cliqtel as a secondary SIP trunk for FreePBX to fail over when your primary carrier has an outage. Keep your customers reachable 24/7.

FreePBX इंटीग्रेशन — FAQ

How do I connect Cliqtel to FreePBX?

Create a SIP trunk in your Cliqtel portal, copy the credentials, and paste them into FreePBX's SIP provider settings. A full step-by-step guide is in the setup steps above.

Does Cliqtel work with my version of FreePBX?

Cliqtel supports all current and recent versions of FreePBX. Check the supported versions list above or contact support if you're running an older release.

How much does it cost to use Cliqtel with FreePBX?

Cliqtel has no setup fees, no monthly platform fees, and no channel limits. You pay only for the DID numbers you rent (from EUR 1.49/mo) and the minutes you use. See our pricing page for details.

Can I use my existing phone numbers?

Yes. Cliqtel supports porting for most countries. Contact support with your existing numbers and we'll check portability and timelines (typically 5-10 business days).

Does FreePBX need any special firewall configuration?

Open UDP 5060 (SIP) and UDP 10000-20000 (RTP) outbound to sip.cliqtel.com. Most PBX systems handle this automatically if you're not behind a strict NAT.

क्या आप FreePBX कनेक्ट करने के लिए तैयार हैं?

सेकंडों में एक प्री-कॉन्फ़िगर्ड SIP trunk बनाएं। आपके क्रेडेंशियल्स तुरंत जनरेट होते हैं।

FreePBX