Avaya IP Office

PBX द्वारा Avaya Inc जेनरिक

Avaya IP Office is a unified communications platform used in mid-market and enterprise environments. Connect Cliqtel as a SIP trunk provider through the IP Office Manager for registration-based trunk authentication and DID routing.

सपोर्ट करता है: R11, R12।
अभी कनेक्ट करें विज़िट करें Avaya Inc →

फीचर्स

कैसे कनेक्ट करें

1
Create SIP Line in IP Office Manager
Open IP Office Manager, navigate to Lines, and create a new SIP Line with ITSP Domain set to sip.cliqtel.com.
2
Configure credentials
Enter your Cliqtel username and password in the SIP Credentials tab of the SIP Line configuration.
3
Set up incoming call routes
Create incoming call routes matching your Cliqtel numbers to extensions, hunt groups, or auto attendants.
4
Merge config and test
Send the configuration to the IP Office system. Verify trunk registration and make test calls.

आवश्यकताएँ

Trunk कॉन्फ़िगरेशन

जब आप कनेक्ट करते हैं, तो इन ऑप्टिमाइज़्ड डिफ़ॉल्ट के साथ एक SIP trunk बनाया जाता है:

transport
udp
codec preference
g722,ulaw,alaw
nat mode
auto
auth type
credentials
max channels
8

पोस्ट-सेटअप चेकलिस्ट

  • SIP Line shows Registered in System Status
  • Inbound call reaches correct extension or hunt group
  • Outbound calls display correct caller ID

Avaya IP Office + Cliqtel: उपयोग के मामले

Replace your current SIP provider

Migrate your Avaya IP Office system from an expensive SIP provider to Cliqtel without changing your PBX configuration — same SIP protocol, transparent per-number pricing.

Add international numbers to Avaya IP Office

Expand your Avaya IP Office deployment with local, toll-free, and mobile numbers in 70+ countries. Assign them to extensions or queues exactly as you do today.

Failover and redundancy

Add Cliqtel as a secondary SIP trunk for Avaya IP Office to fail over when your primary carrier has an outage. Keep your customers reachable 24/7.

Frequently asked

Avaya IP Office इंटीग्रेशन — FAQ

How do I connect Cliqtel to Avaya IP Office?
Create a SIP trunk in your Cliqtel portal, copy the credentials, and paste them into Avaya IP Office's SIP provider settings. A full step-by-step guide is in the setup steps above.
Does Cliqtel work with my version of Avaya IP Office?
Cliqtel supports all current and recent versions of Avaya IP Office. Check the supported versions list above or contact support if you're running an older release.
How much does it cost to use Cliqtel with Avaya IP Office?
Cliqtel has no setup fees, no monthly platform fees, and no channel limits. You pay only for the DID numbers you rent (from EUR 1.49/mo) and the minutes you use. See our pricing page for details.
Can I use my existing phone numbers?
Yes. Cliqtel supports porting for most countries. Contact support with your existing numbers and we'll check portability and timelines (typically 5-10 business days).
Does Avaya IP Office need any special firewall configuration?
Open UDP 5060 (SIP) and UDP 10000-20000 (RTP) outbound to sip.cliqtel.com. Most PBX systems handle this automatically if you're not behind a strict NAT.

अधिक PBX इंटीग्रेशन

3CX
3CX
Connect Cliqtel numbers to your 3CX phone system with GUI-led registration setup.
 FreePBX
FreePBX
Add Cliqtel SIP trunks to FreePBX with PJSIP registration and full route control.
 Asterisk
Asterisk
Connect Asterisk directly to Cliqtel with PJSIP config files — full control, no GUI required.
 Yeastar
Yeastar
Set up Cliqtel as an ITSP provider on Yeastar P-Series and S-Series systems.
 Cisco CUCM
Cisco CUCM
Connect Cliqtel to Cisco Unified Communications Manager via SIP trunk or SBC.
 Mitel MiVoice
Mitel MiVoice
Connect Cliqtel to Mitel MiVoice Business for SIP trunk-based PSTN connectivity.

क्या आप Avaya IP Office कनेक्ट करने के लिए तैयार हैं?

सेकंडों में एक प्री-कॉन्फ़िगर्ड SIP trunk बनाएं। आपके क्रेडेंशियल्स तुरंत जनरेट होते हैं।

अभी कनेक्ट करें सभी इंटीग्रेशन ब्राउज़ करें